In stock > 5 Pcs
2Pcs | 10% | 112,41 kr/Pcs |
3Pcs+ | 15% | 106,16 kr/Pcs |
GlasTIFY UVTG+ toughened glass is made from lightweight and milled AGC glass with a thickness of just 0.28mm.
In the manufacturing process, it has been hardened at 420°C, so it has a surface hardness of 9H, providing the highest level of protection during everyday use and absorbing the force of impact.
UVTG+ is bonded using a liquid substance over the entire surface of the screen and the substance is then cured using a UV lamp. This combination produces the ideal effect of smoothness, clarity and responsiveness on a curved screen.
The glass is precisely made and fully functional. Please note that you receive 2 pieces of glass in the set.
GlasTIFY glasses need no introduction, as they are the absolute "TOP" in the category of screen protection.
* The glass is compatible with most cases available on the market, the die-cut is "Case Friendly".
** Remember to remove and re-add fingerprint lines - if present - after installing the glass.
CHECK OUT HOW SIMPLE ASSEMBLY IS: https://youtu.be/bKRgFJ4Rg_w
ASSEMBLY INSTRUCTIONS:
1) Start the installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere and you won't be disturbed by the installation.
2) Level the phone so that it lies evenly, otherwise the glue will run off the phone and the installation will fail.
Remember to seal the top speaker with the sticker from the kit.
3) Use an alcohol-soaked wipe to clean the surface thoroughly, then use a dry cloth to polish.
4) Get rid of the dust with a sticker.
5) Unscrew the main cap (the glue will not flow) and apply the tube to the very centre of the screen, then gently unscrew the top cap (the glue will start to flow).
6) Remove the protective layer and place the glass on the display, if you place the glass crookedly you can move it freely as long as the glass floats on the screen.
Wait several seconds until the adhesive has filled the entire surface of the glass.
7) Using a UV lamp, cure the glass in each zone for 10 seconds.
8) Clean the phone of any glue residue and re-add the fingerprint.
PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Hardness 9H
- Adapted to a rounded screen
- 2.5D milled edges for a pleasant feel
- Hydrophobic layer
- Oleophobic layer
- Perfectly transparent
- Does not affect tactile sensitivity
- Dimensions: 160x75mm
SET INCLUDES:
2 x GlasTIFY UVTG+ glass
1 x Installation kit
Jano
sk
GLASTIFY UVTG+ 2-PACK GALAXY S23 ULTRA CLEAR (9490713929636)
Oliver
sk
GLASTIFY UVTG+ 2-PACK GALAXY S23 ULTRA CLEAR (9490713929636)