2Pcs | 10% | 58,41 kr/Pcs |
3Pcs+ | 15% | 55,16 kr/Pcs |
Can flexible mean better?
With a slim thickness of just 0.3mm and full screen coverage, the Hofi hybrid glass is almost invisible.
Hardness of 7H achieved through the ceramic coatings used.
These are the characteristics of a hybrid of glass and film, which means not only high pressure or scratch resistance, but also full touch sensitivity and perfect clarity and image saturation.
And finally, and most importantly, the product's greatest advantage - it won't crack or shatter, unlike traditional toughened glass!
Find out how to install:
https://www.youtube.com/watch?v=j5WIzyY5AzA
ASSEMBLY INSTRUCTIONS:
The installation of this model of glass looks different from traditional ordinary toughened glass on a thin adhesive layer, being slightly more difficult due to the thicker adhesive layer.
At the initial stage of application, bubbles or air strips may remain trapped under the glass, which have to be guided out with repetitive movements to the edge, but the easiest way in this case is to peel off the coating to the air bubble area and stick it on again, guiding the air out with, for example, an ATM card.
It is also important to remember that, because of the curvature, the curvature of the glass must coincide with the curvature of the screen.
If the glass does not stick on either side, it means that it has been glued crookedly, in which case you will have to peel it off and try the installation again until it is right.
Due to the polishing and milling of the screen, this requires up to a few minutes of work in some cases, but the correct end result is stunning.
PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Surface hardness 7H
- Thickness 0.3mm
- Maintains full sensitivity to touch
- Precisely tailored
- Dimensions:42x25mm
Kit contains:
2 x Hofi Hybrid Pro+ glass
1 x Installation kit
Do you have experience with this product? Help others to choose.